Wan Or Dsl For Nbn. NBN connection types what do I have and which is best? Tom's Guide The four colour states of the WAN/DSL light are: Green: Either Ethernet is connected or digital subscriber line (DSL) is synced To get yourself online, you just need to connect your modem/router's WAN port to the top port of the NBN box (FTTC NCD) and the NCD's DSL port to the phone socket at your premise
NBN Connection Types — from jazi.net
If you're connecting a NBN FTTC (Fibre to the Curb) service, your router will need to support an Ethernet WAN connection The four colour states of the WAN/DSL light are: Green: Either Ethernet is connected or digital subscriber line (DSL) is synced
NBN Connection Types —
if you have FTTc then you will still be using "phone lines" but requires a second NBN connection device to convert to be useful, you modem/router is plugged into the WAN port with an ethernet cable. "DSL" ports for modems are redundant in australia since NBN, completely different communication technology II have plugged the other end of the Ethernet cable supplied with my Wi-Fi gateway into the correct port on the gateway (usually labelled 'WAN', 'internet' or 'nbn').
How to set up DLink DSLG225 for nbn FTTC TPG Support. Connect an Ethernet (the one that's thicker than the phone cable) to the WAN/LAN port on your router to port 1 on the nbn fibre NTD box. If this light is off, check the Telstra and NBN outages pages.
How to set up DLink DSL3785 for nbn FTTP TPG Support. If you're connecting a NBN FTTC (Fibre to the Curb) service, your router will need to support an Ethernet WAN connection WAN port - Also known as the internet port that uses RJ-45 Ethernet cable to connect your D-link modem to the nbn connection device